Top Menu

Tag Archives | yokomo

Yokomo: RWD Drift Car YD-2 RTR

Yokomo revealed the RWD Drift Car YD-2 for begginners. This model comes as a complete set that covers everything that beginners tend to stumble, such as assembling the chassis, mounting RC equipment and painting the body.

More than 90% of the RWD Drift Car YD-2‘s parts that make up the chassis are the same as the base model YD-2Z, and not only spare parts but also abundantly released optional parts can be used, and expandability is perfect.

Continue Reading

Yokomo BD11 competition 1 10th touring car

After teasing us in the last few days, Yokomo have finally revealed the BD11, successor to the BD10 Touring platform. The Japanese designers felt that it was time for a new touring car platform and create a whole new car to enjoy racing competitively refining the suspension and drivetrain thinking about “usability” and allowing anyone to compete in the race.

Yokomo BD11 competition 1 10th touring car chassis

The characteristic high-rigidity long suspension arm made of graphite is composed of a hybrid with resin and aluminum parts, reducing chassis roll and improving cornering speed. Durability is also confirmed by repeated tests, and it is possible to attack corners with confidence.

Continue Reading

Yokomo BL-EP6 Brushless ESC mon

Yokomo released the BL-EP6 Brushless Speed Controller: and ESC that comes with a programmer and realizes a reasonable price while supporting each category of on, off, and drift. In addition to Yokomo’s sensor-type brushless motors, it is also possible to drive general-purpose sensorless motors.

Check the video below!

Continue Reading

YZ-114 Plus

Yokomo has announced their new YZ-114 Plus AC/DC Charger. This charger has different charge modes including balance, fast charging, storage mode and is compatible with all type of battery Li-po, Li-fe, Li-ion, Li-HV (1-6 cells), Ni-MH and Ni-cd (1-15 cells).

The YZ-114 Plus is equipped with a large screen LCD and offer 100W charge currents of up to 12A. You will also find a USB output with 2.1A for smartphone charging.

Continue Reading

BD9 MID Motor conversion kit

Zero Tribe has released the new MID Motor conversion kit for the Yokomo BD9 Touring Car we spotted at the begin of July. This conversion kit is based on the BD9 main chassis. The purpose is to reduce the time lag during the use of the throttle by eliminating the difference in belt length between front and back.

As a result, the motor is laid out centrally, enabling a balanced mid-ship layout of chassis using short LiPo battery.

Continue Reading

Revoshock

The Japanese RC brand Team Axon announced the new Revoshock dampers. These big bore shock absorbers are designed for the Yokomo YD-2 and YD-4 drift cars and utilise 11.5mm diameter 16-hole shock pistons (with HVF-coated threaded alloy shock bodies for ultra low friction). The clearance between the piston and shock body is only 0.025mm, ensuring minimal oil blow-by and thus predictable shock performance.

The Revoshock uses a new piston shaft seal design with the lower cartridge seals with a smaller diameter compared to standard P3 O-rings, which ensures the seals are not being pinched by the shock body which created a floating design that leads to virtually no friction between the seals and the shock shaft.

Continue Reading